VCM-D1 Single Channel Uni-stable Driver

Shutter Drivers

Electronic shutter drivers and timers are available in both standard and custom units. OEM drivers are also available. Please choose a shutter driver or shutter timer model from the list for specific product information.
  • 型號
  • 產品概述
  • 庫存
  • 詢價數量
  • 詢價車
VCM-D1

Single Channel Driver

  • ● The UNIBLITZ® VCM-D1 is the optimal driver for the CS, LS, VS, and XRS series shutter devices.
    ●  Normally-open or normally-closed shutter operation.
    ●  Up to 8 units can be controlled independently from one computer serial port. Units can be easily daisy chained with an 810RJ cable (please see “Available Accessories”).
    ●  Exposure determined by external pulse (BNC, TTL) or switch contact closure. Pulsed on/pulsed off exposure control (BNC, TTL) from exter-nal trigger pulse or remote actuate cable.
    ●  Selectable pulse energy for operation of the 35, 45, 65 and 90mm shut-ter types.
    ●  Internal fuse protection for all DC output voltages
    ●  RS-232C input and output connection accessible via dual RJ45 con-nector. All inputs and AUX output controllable via RS-232 interface.
    ● 710A shutter interconnect cable included (7-pin WPI female to 5-pin SWC male, 3 meters)
    ● The key switch on the VCM-D1’s front panel allows the selection of three operating modes:
    STD: Standard shutter operation (STD) exposure determined by external pulse source or switch contact closure.
    A: Line interrupt (A) with power loss; unit powers down. When power is restored, unit must be manually or remotely reset to resume standard operation.
    B: DC interrupt (B) detects break in external switch contact. When continuity is restored, unit must be manually or remotely
    reset to resume standard operation.
    ● Electronic Synchronization system can be disabled via rear panel function switch.
    ● LOCAL/REMOTE switch allows manual operation of the shutter without requiring removal of external input signals.

    Specifications:
    ● Size (HWD) 2.73 x 5.41 x 8.18 inches (69.3 x 137.4 x 207.8 mm)
    ● Weight 3.5 lbs (1.59kg).
    ● Power 115/230 VAC, 50-60 Hz, 60 W
    ● RoHS compliant
    ● CE/UL/CSA certification

加入
ED12DSS

Open Frame Bi-stable Driver

  • ● The ED12DSS is the optimal driver for the UNIBLITZ® N-CAS® DSS Shutter Series
    ● Open frame printed circuit card suitable for OEM applications
    ● Operates DSS series or NS series bi-stable shutter devices.
    ● Exposure determined by external pulse (BNC,TTL active high) or switch contact closure (when switching internal +5VDC into shutter input)
    ● In-line PULSE INPUT BNC active high 5V TTL
    ● Selectable pulse high current duration for specific DSS/NS series shut-ters via 4-position piano switch
    ● Internal fuse protection for SHUTTER OUTPUT
    ● 203D Shutter interconnect cable included – JST 2-pin to JST 2-pin, 3ft in length
    ● ED-IOP Input cable harness included for power and trigger signal input:
         - +5V TTL signal input (BNC)
         - +5VDC output (to enable driver from external switch contact or transistor switch closure)
         - Input/output interface cable: 18-inch red/black bare power leads, 6-inch BNC trigger input with reference ground. Both terminate to Tyco/Amp 5-pin polarized connector for connection to ED12DSS.
    ● Power input to controller via 2-wire input harness

    Specifications:
    ● Size (HWD) 0.50 x 2.25 x 2.25 inches (12.7 x 57.2 x 57.2 mm)
    ● Weight 0.730 oz (0.021 kg)
    ● Power +12 to 24VDC at 1.5A - user provided.
    ● RoHS Compliant

加入
D880C

Open Frame Uni-stable Driver

  • ● The D880C is a state-of-the-art shutter driver circuit utilizing constant current control which has shown to increase shutter life time over stand-ard capacitive discharge types.
    ● Open frame printed circuit card suitable for OEM applications.
    ● Pluggable 12 position I/O connector.
    ● Easily interfaces with electronic synchronization system.
    ● Output provided for electronic synchronization system.
    ● 710P shutter interconnect cable included (7-pin female to 7-wire pigtail, 10ft.)
    ● Exposure determined by external pulse source (TTL, active high).
    ● Supplying a TTL (5V) logic level to the trigger input or connecting a me-chanical or electronic switch between the trigger input and +6.75VDC output is all that is required to control the D880C

    Specifications:
    ● Size (HWD) 1.0 x 3.2 x 4.0 inches (25.4 x 81.2 x 101.0 mm)
    ● Weight 3 oz. (.09 Kg.)
    ● Power +24VDC at 1.5A - user provided.
    ● RoHS Compliant

加入
VDM1000

Single Channel Bi-stable/Uni-stable Driver

  • ● The VDM1000 is the optimal driver for the UNIBLITZ® N-CAS® NS series shutters
    ● Normally-open or normally-closed shutter operation in uni-stable mode, operates in bi-stable mode as well.
    ● Up to 8 units can be controlled independently from one computer serial port. Units can be easily daisy chained with an 810RJ cable (please see “Available Accessories”).
    ● Exposure determined by external pulse (BNC, TTL) or switch contact
    ● RS-232C input and output connection accessible via dual RJ45 connector
    ● Operates on +36VDC, fuse protected. Power input to controller via 2.0mm jack, on/off control with rocker switch
    ● Indicators for power, driver, and SYNC status.
    ● 510A shutter interconnect cable included (5-pin male Switchcraft to 5-pin female Switchcraft, 3 meters).
    ● Selectable pulse energy for operation of large aperture shutter devices, which require additional high-energy pulse for their operation.
    ● Selectable pulse high current duration for specific shutters via time select rotary octal switch.
    ● SYNC OUTPUT BNC can be selected for either active-low or active-high
    ● PULSE INPUT BNC can be selected for either active-low or active-high

    Specifications:
    ● Controller
       Size (HWD) 1.96 x 4.34 x 7.23 inches (49.9 x 110.3 x 183.6 mm)
       Weight 1.20 lbs (0.54 kg)
    ● Power Supply
       Size (HWD) 1.80 x 3.00 x 5.8 inches (45.7 x 76.2 x 147.3 mm)
       Weight 1.10 lbs (0.50 kg)
       +36VDC at 1.83A, 66W
    ● RoHS Compliant
    ● CE/UL/CSA certification

加入
VDM1000B

Open Frame Bi-stable/Uni-stable Driver

  • ● The VDM1000B is the optimal driver for the UNIBLITZ® N-CAS® NS se-ries shutters
    ● Normally-open or normally-closed shutter operation in uni-stable mode, operates in bi-stable mode as well.
    ● 3U Euro-Card PCB outline
    ● Up to 8 units can be controlled independently from one computer serial port. Units can be easily daisy chained with an 810RJ cable (please see “Available Accessories”).
    ● Exposure determined by external pulse (BNC, TTL) or switch contact clo-sure to PULSE INPUT BNC
    ● SYNC OUTPUT BNC can be selected for either active-low or active-high
    ● PULSE INPUT BNC can be selected for either active-low or active-high
    ● RS-232C input and output connection accessible via dual RJ45 connector
    ● Operates on +36VDC at 1.83A, fuse protected.
    ● LED Indicators for power, driver active, and sync active
    ● Selectable pulse energy for operation of large aperture shutter devices, which require additional high-energy pulse for their operation.
    ● Selectable pulse high current duration for specific shutters via 8-position Rotary DIP switch.

    Specifications:
    ● Size (HWD) 1.30 x 3.94 x 7.23 inches (32.9 x 100.0 x 183.6 mm)
    ● Weight 6.40 oz (0.18kg)
    ● Power +36VDC at 1.83A, 66W
    ● RoHS compliant

加入
VMM-D3

Three Channel Driver

  • ● The VMM-D3 is a three-channel shutter driver capable of controlling up to three UNIBLITZ® shutters independently.
    ● One input to trigger all shutters simultaneously
    ● LED Indicators for Power, Driver Active, and SYNC Active status
    ● Exposure determined by external pulse width, or switch contact closure.
    ● One output to monitor when all individual SYNC outputs are active.
    ● Manual open/close switch for each channel. Allows inverse shutter op-eration.
    ● Selectable pulse energy for operation of the 35, 45, 65 and 90mm shut-ter types (slide switch for each channel).
    ● Up to 8 units can be controlled independently from one computer serial port.
    ● RS-232C interface addressable via 8 selectable addresses.
    ● Separate fuse for each shutter channel.
    ● (Three) 710C 10ft. shutter interconnect cables included

    Specifications:
    ● Size (HWD) 2.64 x 5.35 x 8.19 inches (67.0 x 136.0 x 208.0 mm).
    ● Weight 4.45 lbs. (2.02 kg).
    ● Power 115/230 VAC, 50-60 Hz, 60 W

加入
VMM-D4

Four Channel Driver

  • ● The VMM-D4 is a four-channel shutter driver capable of controlling up to four UNIBLITZ® shutters independently.
    ● One input to trigger all shutters simultaneously
    ● LED Indicators for Power, Driver Active, and SYNC Active status
    ● Exposure determined by external pulse width, or switch contact closure.
    ● One output to monitor when all individual SYNC outputs are active.
    ● Manual open/close switch for each channel. Allows inverse shutter op-eration.
    ● Selectable pulse energy for operation of the 35, 45, 65 and 90mm shut-ter types.
    ● Separate fuse for each shutter channel.
    ● (Four) 710C shutter interconnect cables included

    Specifications:
    ● Size (HWD) 2.64 x 5.35 x 8.19 inches (67.0 x 136.0 x 208.0 mm.)
    ● Weight 4.55 lbs. (2.06 Kg)
    ● Power 115/230 VAC, 50-60 Hz, 60 W

加入

VCM-D1 Single Channel Driver

Drawings

Compatibility

VS
LS CS
DSS TS NS XRS
VS14 LS2 CS25       XRS6
VS25 LS3 CS35       XRS14
VS35 LS6 CS45       XRS251
    CS65        
    CS90HS        

1 This device requires two drivers for operation.

Available Accessories

● 710R (BNC male to hand held pushbutton switch)
● 710R/F (BNC male to foot activated switch)
● 510A (5-pin SWC male to 5-pin SWC female)
● 810RJ (8-pin RJ45 male to 8-pin RJ45 male)
● 910RJF (Adapter, RJ45 to DB-9F)
● 910RJM (Adapter, RJ45 to DB-9M)

 

ED12DSS Open Frame Bi-stable Driver

Drawings

Compatibility

VS
LS CS
DSS TS NS XRS
       DSS10  TS2B  NS15B1  
       DSS20  TS6B  NS25B1  
       DSS25    NS35B1  
           NS45B1  

1 This device must be equipped with the “ED” option for proper operation with the ED12DSS.

 

D880C Open Frame Uni-stable Driver

Drawings

Compatibility

VS
LS CS
DSS TS NS XRS
VS14 LS2 CS25       XRS6
VS25 LS3 CS35       XRS14
VS35 LS6 CS45       XRS251
    CS65        
    CS90HS        

1 This device requires two drivers for operation.

 

VDM1000 Single Channel Bi-stable/Uni-stable Driver

Drawings

Compatibility

VS
LS CS
DSS TS NS XRS
VS141 LS21 CS251  DSS102  TS2B2  NS15B2 XRS6
VS251 LS31 CS351  DSS202  TS6B2  NS25B XRS14
VS351 LS61 CS451  DSS252    NS25S XRS252,3
    CS651      NS35B  
    CS90HS1      NS45B  
          NS65B  

1 710A Interconnect required for operation with this shutter device.
2 Special Interconnect required for operation with this shutter device. Please contact technical support for more information.
3 This device requires two drivers for operation.

Available Accessories

● 710A (7-pin female WPI to 5-pin male SWC)
● 710R (BNC male to hand held pushbutton switch)
● 710R/F (BNC male to foot activated switch)
● 810RJ (8-pin RJ45 male to 8-pin RJ45 male)
● 910RJF (Adapter, RJ45 to DB-9F)
● 910RJM (Adapter, RJ45 to DB-9M)
● 5M203D (5-pin male SWC to 2-pin JST)

 

VDM1000B Open Frame Bi-stable/Uni-stable Driver

Drawings

Compatibility

VS
LS CS
DSS TS NS XRS
VS141 LS21 CS251  DSS102    NS15B2 XRS6
VS251 LS31 CS351  DSS202    NS25B XRS14
VS351 LS61 CS451  DSS252    NS25S XRS252,3
    CS651      NS35B  
    CS90HS1      NS45B  
          NS65B  

1 710A Interconnect required for operation with this shutter device.
2
Special Interconnect required for operation with this shutter device. Please contact technical support for more information.
3
This device requires two drivers for operation.

Available Accessories

● PS36 (+36VDC/1.83A Power Supply)
● 510A (5-pin male SWC to 5-pin female SWC)
● 5M203D (5-pin male SWC to 2-pin JST)
● 710A (7-pin female WPI to 5-pin male SWC)
● 810RJ (8-pin RJ45 male to 8-pin RJ45 male)
● 710R (BNC male to hand held pushbutton switch)
● 710R/F (BNC male to foot activated switch)
● 910RJF (Adapter, RJ45 to DB-9F)
● 910RJM (Adapter, RJ45 to DB-9M)

 

VMM-D3 Three Channel Driver

Drawings

Compatibility

VS
LS CS
DSS TS NS XRS
VS14 LS2 CS25       XRS6
VS25 LS3 CS35       XRS14
VS35 LS6 CS45       XRS251
    CS65        
    CS90HS        

1 This device requires two drive channels for operation.

 

VMM-D4 Four Channel Driver

Drawings

Compatibility

VS
LS CS
DSS TS NS XRS
VS14 LS2 CS25       XRS6
VS25 LS3 CS35       XRS14
VS35 LS6 CS45       XRS251
    CS65        
    CS90HS        

1 This device requires two drive channels for operation.

 

VMM-T1 Single Channel Shutter Driver/Timer

Drawings

Compatibility

VS
LS CS
DSS TS NS XRS
VS14 LS2 CS25       XRS6
VS25 LS3 CS35       XRS14
VS35 LS6 CS45       XRS251
    CS65        
    CS90HS        

1 This device requires two drive channels for operation.